Difference between revisions of "Lobule VIIAt"

From IACL
Jump to navigation Jump to search
Line 18: Line 18:
 
image:AnonKwijibo47_border_cr2_7B.jpg|''Figure 1'':In my experience this is the best place to dicern the border between cruise 2 and VIIB
 
image:AnonKwijibo47_border_cr2_7B.jpg|''Figure 1'':In my experience this is the best place to dicern the border between cruise 2 and VIIB
 
image:AnonKwijibo50_shows7BandCr2_curve.jpg|''Figure 2'':In this scan on the left 7B curves around Cr2 in a somewhat unusual manner.
 
image:AnonKwijibo50_shows7BandCr2_curve.jpg|''Figure 2'':In this scan on the left 7B curves around Cr2 in a somewhat unusual manner.
 +
image:AnonKwijibo53_unclear_cr2_7b.jpg|''Figure 3'' : The boundary between Cr2 and VIIB in the left hemisphere is particularilly difficult in this scan because there are branches crossing all possible boundaries.
 
</gallery>
 
</gallery>
  

Revision as of 22:25, 14 October 2009

<meta name="title" content="Lobule VIIAt (Crus II)"/>

Cerebellum Protocol Project
Whole Cerebellum Lobe Definitions Vermis Definition Lobule Delineation

Lobule VIIAt (Crus II)

  • Location: Spans entire cerebellum about middle of the sagittal orientation
  • Description: This lobule can first be identified and painted in the midsagittal and then the paint can be propagated laterally, can also be seen in the posterior axial slices
    • In the midsagittal region, there is an easy to define fissure separating this lobule and Lobule VIIIA (as shown in Figure 55)
  • This fissure is primarily defined by the most dominate fissure between VIIAf and the prebiventure fissure, however determining which fissure qualifies can be difficult. Be patient and consider all perspectives and relavent regions of the scan in order to make the best decision possible.
  • The best palace to discern this boundary is in the final figure below.